Everywhere! In California that is! We are a mobile company and we come to your boat, marina, house, storage, etc. to perform all aspects of installing a new High Performance Deck.

NO! PE Foam Decking does not stain. Our floors clean easily with a boat brush and water. Our competitors use an EVA / EVA PE blend foam which is not 100% Closed Cell such as ours. 100% PE which makes it 100% Closed Cell and 100% Stain Resistant. For dried on items, we recommend a mild soap if needed. Tougher stains, such as Sharpie Marker or Wood Stain, a stiff brush and Simple Green works great. For the toughest stains, you can use a 50/50 mixture of Bleach and Water.

Light amplification is the reflection of sunlight off surfaces adjacent to foam decking and may create a supercharge "laser beam like" light, that will exceed maximum temperature of 180 degrees. Think of it as a magnifying glass and the sun. This will in effect melt the decking. Most boats do not experience this effect and is usually never an issue. Our estimators always try to identify a possible issue at the time of our first visit and offer remedies. Get Decked Marine will warranty Light Amplification one time and the client must work with Get Decked Marine in remedying the issue.

The average life span of PE Foam Decking in California with average use and cleaning... Stored with a cover, 7-10 years Stored uncovered, 5-7 years

From the time that we digitize your boat, to the installation day is 2-4 weeks. Much better than our competitors which are typically 8 weeks or more.

There are many different types of boat flooring that has been used over the years. Here is a basic list and what is needed to install Get Decked Marine flooring. Bare nonskid fiberglass/gelcoat - There are no steps needed to be done Teak/Wood - The teak will need to be sanded smooth and several coats of clear epoxy coating is needed. Plas-teak - Plas-teak needs to be removed completely. A difficult job, but can be done. Glued down Carpet - The carpet needs to be removed and remaining carpet fibers need to be sanded away. An epoxy coating may need to be added. Snap in Carpet - The easiest of them all. Carpet pads are removed, snaps are unscrewed from the floor and the remaining holes are then filled with epoxy.

There are a few colors that just cannot be warranted for fading. Red Orange Royal Blue If you choose to use these colors, we suggest keeping your boat covered at all times during storage.

Pets (dogs) enjoy the feel of the cushion like pads of Foam Flooring. While our material is tough, it is foam and if scratched at enough, like dogs do sometimes, it will tear.

Floor preparation is vital in the longevity of your new decking. While Get Decked Marine will guide you through the preparation steps, it is ultimately the responsibility of the client to have their vessels floor ready for installation of your decking. At time of installation, if our installers determine that the floor is not ready for installation due to inadequate floor prep, we will re-schedule installation at a future date and guide you through the steps necessary. We reserve the right to charge a trip fee of no less than $200.00 for the travel and time incurred following a re-scheduled installation due to inadequate floor preparation.